Measure Strings – 12D Wiki

Measure Bearing / Distance

This tool is used to measure a bearing and distance between 2 points. Use: Utilities => Measure => Bearing/Distance Once the panel is open: Select the mode: Disjoint - is the default option to measure between 2 points. Continuous - in this mode, after the initial measure has been reported in the panel, the user [...]

Measure Value

This tool is used to calculate and display any of the measures available in the Measures pop-up menu. Use: Utilities => Measure => Value Note: The Measures pop-up menu can be found in numerous panel through out the 12d Model program. Once the panel is open, there are four options: At Point (Point only measurement) [...]

Measure Xfall by Strings

This tool is used to measure the Crossfall (Xfall) between 2 selected strings. Use: Utilities => Measure => Xfall by Strings Once the panel is open: Select the Reference String - this could be a Road Centreline Super Alignment and the Chainage will be calculated from this string, and the calculation between strings 1 and [...]

Measure Xfall by Strings (Advanced)

This tool is used to measure the Crossfall (Xfall) between 2 strings. Use: Utilities => Measure => Xfall by Strings (advanced) Once the panel is open: The strings can be selected individually or the Pick All button allows the 3 strings to be picked one after the other with one button. Select the Reference String [...]