MTF – 12D Wiki

MTF Snippet – Driveway Crossing (Layback)

If you are using Apply MTF to create your road design and need to create Driveway Crossings (Laybacks) like the one shown below, you are in the right place. MTF Snippet - Driveway Crossing (Layback) Please note: This snippet has been written to work with 12d Model's standard string names. If you are using different [...]

MTF Snippet – Pram Ramp Crossing

If you are using Apply MTF to create your road design and need to create Pram Ramps like the one shown below, you are in the right place. MTF Snippet - Pram Ramp Crossing Please note: This snippet has been written to work with 12d Model's standard string names. If you are using different string [...]

MTF Analyse Subgrade

Fixed=>Boxing=>Analyse Subgrade Analyse Subgrade calculates the Upper Zone of Formation, which is typically from the top of Select Material Zone to the Design Floor Level. Links are then created that represent the floor of the Upper Zone of Formation. Min cut length & Min emb length Sets the minimum length of a cut and embankment [...]

MTF Snippet – Understanding Error Messages

When creating, editing, or sometimes just using Snippets, you may receive error messages in the Output Window. Resolving those errors can be as simple as What, Where, Why. Looking at the error messages below, whilst most of it seems to make no sense at all, you can in fact ignore all of the "programmer speak" [...]