CAD – Page 13 – 12D Wiki

CAD Polygon – Rectangle from 2 points

This tool is used to create a CAD Polygon, a Rectangle From 2 Points. The video below will show how to create a CAD Polygon, a Rectangle From 2 Points. Or continue down the page to see the CAD Polygon, Rectangle From 2 Points create options. More Information will be arriving soon! Stay Posted Thanks [...]

Exporting Data to CAD

To Export the Survey Data and natural Surface Contours to CAD. https://youtu.be/-gTW4VexSQ8 Use: File I/O => Data Output => DWG/DXF/DXB => DWG/DXF/DXB The exported Survey Data and natural Surface Contours shown in BricsCAD below.

CAD Point Toolbar – Angle

This tool is used to create a CAD Point, calculated by projecting a selected position back to a string by a specific angle. The video below will show how to create a CAD Point by using a specific Angle. Or continue down the page to see the CAD Point - Angle create options. This CAD [...]

Import DWG/DXF data

The data set for this project has been received from the surveyor in a file called Barwon1.dwg To import DWG and DXF file to 12d Model, go to File I/O=>Data Import=>DWG/DXF/DXB By typing survey in the Prefix box, 12d Model will place this text at the begining of the model/s imported into the Project . [...]

CAD Point Toolbar – Chainage Offset

This tool is used to create a CAD Point, located at a string Chainage and an Offset from the string. The video below will show how to create a CAD Point Chainage Offset. Or continue down the page to see the CAD Chainage Offset create options. This CAD Point Chainage Offset option is found on [...]

CAD Point Toolbar – Offset

This tool is used to create a CAD Point, located at an Offset from a reference string and a nominated chainage along the reference string. The video below will show how to create a CAD Point at an Offset. Or continue down the page to see the CAD Offset create options. This CAD Point Offset [...]

CAD Point Toolbar – Bearing and Distance

This tool is used to create a CAD Point, located at a given bearing and distance from a start position. The video below will show how to create a CAD Point at a Bearing and Distance from a selected start position. Or continue down the page to see the CAD Bearing and Distance create options. [...]

CAD Point Toolbar – Chainage

This tool is used to create a new CAD Point, located at a specific Chainage on a selected string. The video below will show how to create a new CAD Point at a specific Chainage along an existing string. Or continue down the page to see the CAD Point Chainage create options. This CAD Point [...]

CAD Point Toolbar – Mid-Point

This tool is used to create a CAD Point, located in the middle of two selected positions. The video below will show how to create a CAD Point at the Mid-Point of two selected . Or continue down the page to see the CAD Mid-Point create options. This CAD Point Mid-Point option is found on [...]

CAD Point Toolbar – IP

This tool is used to create a CAD Point, located at the IP of an Arc or Transition segment. 12d Model uses the start and end tangents of the selected Arc or Transition. Note: The IP point is created using the tangent at the start and end of the selected Arc only, not the straight [...]