Design => Pavement => Pavements from tins
In the Pavement Styles Manager, you can set Inner/Outer offsets for each layer. When creating pavements in the MTF, the Inner/Outer are both used.
When using Pavement From Tins, the applying the Inner/Outer offset varies;
- Tin – No offsets used <- this is why you aren’t getting any offsets.
- Edge, Kerb – Outer offset only
- Edge, Batters – Inner/Outer used
- Edge, Surface – Inner/Outer used
For the Edge Treatments, you need to nominate the Model and Strings to use in the correct order. Below is an example for doing a kerb.
