Cut & Fill Tadpoles by definitions

This option is used to create Tadpoles (slope signature strings "12d Symbols") for areas in Cut and Fill. The created Symbols can be applied via the Apply MTF (Tadpoles Adv tab) panel or "Apply tadpoles definitions" as shown below. The Tadpoles styles can be defined to be different for areas (strings) in cut or fill.  [...]
Read More

Downhill Strings

  This Stormwater tool was added to quickly generate 3d strings depicting the overland flow of Stormwater across your project surface. This option only requires 3d strings (Super Strings with vertical elevations).  The resulting model is a set of strings which are split at any crest points and reversed where required so the finished strings [...]
Read More

Import DWF file

  The DWF file is a "digital plot" file. Similar to a digitize/vectorize/scan of a paper drawing, you can also convert/recover DWF files back to DWG (using third party utilities) - but in both cases you may lose substantial amounts of information, structure and precision of the original drawing. Both DWF/DWFx and PDF were meant [...]
Read More

Output DEMs

  Given there are different formats of Ditgital Elevation Models (DEMs). 12d Model have provided different options to produce required DEM files for other software packages.  For more background information on DEM's please read information provided here. The file output options provided by 12d Model include; Arc View Arc View (actual,minimum, maximum, average) FLT DEM [...]
Read More

Details

  The project details are defined by 12d Users and can contain information to be placed on all company title blocks if desired. This panel first appears when a new 12d project is started (Project -> Details -> Details) and calls a standard “project_details.dtl” file from the 12d setup directory. The “project_details.dtl” file can be [...]
Read More

Project Description

  The project "Description" panel is provided for Users to leave a note or message to other 12d Model Users. The description (notes) can first be added when a project is initially created (refer to Open/New Project), or at any stage during the life of the project. To description panel, Use: Project > Details > [...]
Read More

Open / New 12d Project

  To "Open" or create a "New" 12d project can be done a number of ways. If you are not currently in a 12d Model software project; Simply double click on the 12d Model desk top icon (as shown below) and view the list of recently opened projects. Select one from the list provided and [...]
Read More

Check Base Points

  This option allows Users to check the current number of points loaded within a 12d Model project. Project > Check Base Points The size of the 12d Model "Base module", will determine the maximum number of points that can be loaded within a single 12d Model project. (Ignoring the Bigfoot, Base module type).  Typically [...]
Read More

Layout.4d

This simple to add feature allows 12d model menus or Company customized menus to be set on screen when a project is opened. To create the desired layout, you simply need to position the menus (or panels) around your monitor where you would like them to be saved. Using the standard screen layout file (SLX) [...]
Read More

Title Block Files (*.tbf)

Title Block Files (*.tbf) It is suggested that all 12d users create at least two tbf files for for their companies (A1 and A3 size sheets). This will allow users to produce quick and professional plots (PDF files) using very little effort on all future Project work. The following steps are required to create a [...]
Read More